ZyXEL Communications GS-4012F Manuale Utente Scaricare il pdf (Pagina 18)

MVR Support Note

Configuration via CLI on L3 Switch [GS-4024]

Connect your PC or Notebook to the Switch Console port.

1. Open your Terminal program.(e.g. Hyper Terminal in Windows System)

2. Make sure that your port settings are

bps:9600

Data bits:8

Parity: None

Stop bits:1

Flow control: None:

3. After you have connected successfully, enter the correct user name and

the password.

4. Issue “en” or “enable” to go into the privileged mode. Then put “config” to

switch to the configuration mode.

Issue the following commands to setup your Switch in this scenario.

To Create VLAN2 with its related IP domain:

vlan 2

name server

normal 1,3-24

fixed 2

forbidden ""

untagged 2

ip address 192.168.2.1 255.255.255.0

exit

To Create VLAN100 (Multicast VLAN) with its related IP domain (the

dummy interface):

vlan 100

name MVR

normal 1-23

fixed 24

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Nessun commento

ZyXEL Communications GS-4012F Manuale Utente Pagina 18